.

Kirjasto - Tampereen teknillinen yliopisto

Browsing by Department "Materiaaliopin laitos – Department of Materials Science"

Sort by: Order: Results:

  • Ilomäki, Kirsti Maria (2012-03-07)
    The aim of my Master Thesis was developing a reliable adhesion testing method for natural fiber reinforced composites. Flax fiber, synthetic viscose fiber, two different thermoset matrix and chemical surface treatment were ...
  • Akbari, Azin (2013-08-14)
    Shear stresses are a common reason for failure in many industrial applications. Localized shear deformations in certain materials can lead to the formation of adiabatic shear bands. Titanium alloys in particular have proven ...
  • Laine, Johanna (2013-05-08)
    Tulehdukset ovat erityinen huolenaihe haavojen hoidossa, kudosteknologiassa, implantoinnissa ja leikkausten jälkeisissä paranemisprosesseissa. Useat materiaalit tarjoavat hyvän kasvualustan bakteereille, joiden aiheuttamat ...
  • Santa-aho, Suvi (2012-11-09)
    This work concentrates on the non-destructive magnetic Barkhausen noise (BN) method. The BN method can be utilized in the detection of altered material properties such as changes in microstructure and stress. Method can ...
  • Sarlin, Essi (2014-05-16)
    Last decade has shown an increasing interest in hybrid materials and structures. With hybrids there is not only potential to create high strength low weight structures, but also to tailor the properties of the final product ...
  • Menon, Karan (2011-11-09)
    Today products need to have high functionality but low manufacturing costs. Integration of different materials together to make a single final product is the demand at present. Hybrid technology is the answer for the queries ...
  • Alapieti, Tytti (2012-06-06)
    This Master of Science thesis is done for Nomojeans Corporation Oy (NOMO Jeans), which was founded in Helsinki in September 2010. NOMO Jeans designs, produces, and sells customized made-to-measure jeans. The idea is based ...
  • Peterson, Joel (2012-11-30)
    Complete garment knitting technology is a method of producing knitted products, generally fashion garments, ready-made directly in the knitting machine without additional operations such as cutting and sewing. This makes ...
  • Chávez Niemelä, Aleksis (2014)
    The Compact Muon Solenoid, as well as other experiments within the Large Hadron Collider at CERN, will undergo a vast redesign during the decade of 2010. The main reasons behind this overhaul are to improve accuracy and ...
  • Zhang, Yuanyuan (2013-08-14)
    This paper focus on the topics related to e-business. With the fast development of e-business in fashion industry, more and more companies have realized e-business is an indispensable part for companies. However, many ...
  • Soltani, Ayat (2013-08-14)
    During plastic deformation, metastable austenitic stainless steels can go through a phase transformation from unstable austenite to martensite. This leads to an increase in the work hardening rate. Since steels are widely ...
  • Ängeslevä, Anne-Mari (2013-11-08)
    Pakkauksen ja pakkausprosessin korkea laatu ovat merkittävässä asemassa elintarvikkeen tuoteturvallisuuden ja tuotannon kustannusten hallinnan kannalta. Tässä työssä tutkittiin vakuumipakattujen lihajalostepakkausten laatua ...
  • Pöyry, Juha-Pekka (2012-01-11)
    Extruder die coatings were studied in the extrusion of modified polyethylene (PE-mod). When PE-mod is extruded at elevated temperatures, it will change into a high-viscosity polymer melt causing high pressure inside the ...
  • Pönkä, Arttu (2012-12-05)
    Työn tarkoituksena oli selvittää faasimuutosmateriaalien toiminnan pääperiaatteet, oleellisimpien faasimuutosmateriaalien ominaisuudet, faasimuutosmateriaaliteollisuuden nykytilaa ja suurimmat yritykset sekä tärkeimmät ...
  • Kannisto, Erkka Juhani (2012-12-05)
    This master’s thesis is divided into two sections: A literature survey and an experimental part. The literature survey broadly reviews ceramic nanocomposites and gives the reader a basic understanding concerning their ...
  • Stenlund, Kirsikka (2013-11-08)
    The purpose of this work was to manufacture a dense structure with small pores for biomedical studies. The structures are made of fine multifilament yarn by weaving. The aim was to get the yarn densities as high as possible, ...
  • Hakonen, Pasi (2011-10-05)
    Each year several hunters, conscripts and sport shooters suffer from tinnitus and other problems with their hearing. A great part of these problems are resulting from the exposure to noise from small arms fire without ...
  • Paukkunen, Johanna (2012-06-06)
    The objective of this Master of Science thesis was to find out whether foaming could be implemented to offer new property-combinations for gaskets in electrical devices. Gaskets used as a basis of the study are made of ...
  • Hyvärinen, Leo; Hakalahti, Johanna; Niemi, Kari; Vuoristo, Petri (2014)
    Tässä raportissa on esitetty yhteenveto termisesti ruiskutettujen alumiinioksidipohjaisten pinnoitejauheiden ja niistä eri termisillä ruiskutusmenetelmillä valmistettujen pinnoitteiden ominaisuuksista. Työ liittyy osana ...
  • Mardoukhi, Ahmad (2013-10-09)
    The objective of this work was to investigate the high strain rate and high temperature behavior of mechanically alloyed and oxide dispersion strengthened nickel based superalloy MA 760. These types of alloys are used in ...