Kirjasto - Tampereen teknillinen yliopisto

Frequency parameters in GPRS

Show full item record

Files in this item

Files Size Format View

There are no files associated with this item.

URN: http://URN.fi/URN:NBN:fi:tty-200907102106
Title: Frequency parameters in GPRS
Author: Kärkelä, Jani
Publication type: Diplomityö
Issue date: 2002-12-11
University: Tampereen teknillinen korkeakoulu
Faculty: Tietotekniikan osasto
Department: Ohjelmistotekniikan laitos
Abstract: The current widely used European cellular data technologies are based on GSM data call. However, the data transmission rates with GSM data are slow, connection setup is a rather complicated procedure and pricing is too expensive for most of the users. The GPRS system implements a cellular packet data network on top of the GSM system, and it was designed to solve most of the GSM data problems. The frequency parameters are used in the GPRS system to provide the mobile stations information about frequencies used in the cellular cell. The frequency parameters use several elaborate data structures that are used to pack the frequency information to smaller space for transmission over the radio interface. However, the standardized data structures are loose and leave many things open for the design and implementation. The focus of the thesis was to study the 3rd Generation Partnership Project cellular standards and derive a design and implementation solution for the frequency parameters based on the standards´ requirements.Nykyiset yleisesti Euroopassa käytettävät mobiilit tiedonsiirtomenetelmät perustuvat GSM-datapuhelun käyttöön. GSM-tiedonsiirtonopeudet ovat kuitenkin hitaita, yhteydenotto on monimutkaista ja hinnoittelu on kallis useimmille käyttäjille. GPRS-pakettidataverkko pohjautuu GSM-arkkitehtuurille ja se suunniteltiin ratkaisemaan useimmat GSM-tiedonsiirron ongelmat. GPRS-järjestelmän taajuusparametreilla kerrotaan matkapuhelimille kussakin matkapuhelinsolussa käytettävät taajuudet sekä ne taajuudet, joita puhelimen tulisi käyttää kunkin yhteyden aikana. Suurin osa tiedoista lähetetään kaikille solussa oleville mobiileille yhtä aikaa pakettikontrollikanavalla. Yhteydenmuodostuksen aikana mobiileille kerrotaan, mitä pakettikontrollikanavalla lähetettyjä parametreja niiden tulee käyttää varsinaisen tiedonsiirron aikana. Diplomityössä perehdyttiin 3rd Generation Partnership Project:n tuottamiin matkapuhelinstandardeihin ja johdettiin niiden perusteella suunnittelu ja toteutus GPRS-taajuusparametreille. /Kir10


This item appears in the following Collection(s)

Show full item record

Search TUT DPub


Advanced Search

Browse

My Account

Statistics